Increase the power, speed and control of your bike!
You will need to solder an XT-90 onto the battery wires so you can plug the stock battery into the controller. If you don’t know how to solder contact your local remote control car shop. Also a couple small tabs need to be trimmed on the inside of the plastic body panels. other than those 2 steps it plugs in and works with the stock battery, throttle, and motor. You will need the Vesc tool App for Bluetooth setup and tuning. We will have a Youtube video up for this one soon. If you have questions feel free to reach out.
Warning! Don't try more than 85v power !
Electircal Spec:
Firmware : shipped with custom firmware . DO NOT UPDATE FIRMWARE
2 groups of 12v power port:
12v Aux port: 3pin connector
12 power port : 4pin connector
12V port total current < 3A
Voltage: Max voltage 85V
Current: 240A max (The duration depends on the temperature around the product, heat dissipation and air circulation）
Ports available: PPM,UART(adc1/adc2),Canbus,Hall sensor,TypeC USB, SWD port, NRF port, Ignite Key port, Power button port/12V power port *2
Cables : 12cm 8AWG phase wires , 12cm 8AWG battery cables
Size: 122mm*70mm*34mm(including capacitor highth)
Power button LED lights functional indication:
Running--Green light
Abnormal--Blinking Red
Key Parts Spec:
Mofet Part No: JMSH1001ATL-13
Current amplifier PN: INA240A1
Off state current less than 200uA
Increase the power, speed and control of your bike!
You will need to solder an XT-90 onto the battery wires so you can plug the stock battery into the controller. If you don’t know how to solder contact your local remote control car shop. Also a couple small tabs need to be trimmed on the inside of the plastic body panels. other than those 2 steps it plugs in and works with the stock battery, throttle, and motor. You will need the Vesc tool App for Bluetooth setup and tuning. We will have a Youtube video up for this one soon. If you have questions feel free to reach out.
Warning! Don't try more than 85v power !
Electircal Spec:
Firmware : shipped with custom firmware . DO NOT UPDATE FIRMWARE
2 groups of 12v power port:
12v Aux port: 3pin connector
12 power port : 4pin connector
12V port total current < 3A
Voltage: Max voltage 85V
Current: 240A max (The duration depends on the temperature around the product, heat dissipation and air circulation）
Ports available: PPM,UART(adc1/adc2),Canbus,Hall sensor,TypeC USB, SWD port, NRF port, Ignite Key port, Power button port/12V power port *2
Cables : 12cm 8AWG phase wires , 12cm 8AWG battery cables
Size: 122mm*70mm*34mm(including capacitor highth)
Power button LED lights functional indication:
Running--Green light
Abnormal--Blinking Red
Key Parts Spec:
Mofet Part No: JMSH1001ATL-13
Current amplifier PN: INA240A1
Off state current less than 200uA
