Battery to Enclosure wire Harness. Split pack supported
We tried to make these as a one shoe fits all. It supports discharge bypass BMS such as (Xlite, ZBMS, Maxkgo and others). here are all of the connections:
Battery side:
XT60 male 12AWG
XT30 male 16AWG
XT30 female (single 16AWG for split pack support)
5 pin JST GH 1.25 for split pack
4 pin JST GH 1.25 for Can bus
3 pin JST GH 1.25 for LEDs
Controller side:
XT60 female 12AWG
XT30 female 16AWG
XT30 male (single 16AWG for split pack support)
5 pin JST GH 1.25 for split pack
4 pin JST GH 1.25 for Can bus
3 pin JST GH 1.25 for LEDs
Confirmed to work with extended rails!
it plugs into our batteries exactly how it is but depending on what controller you are using you may need to swap out some connectors on one end. Feel free to reach out with any questions.
We tried to make these as a one shoe fits all. It supports discharge bypass BMS such as (Xlite, ZBMS, Maxkgo and others). here are all of the connections:
Battery side:
XT60 male 12AWG
XT30 male 16AWG
XT30 female (single 16AWG for split pack support)
5 pin JST GH 1.25 for split pack
4 pin JST GH 1.25 for Can bus
3 pin JST GH 1.25 for LEDs
Controller side:
XT60 female 12AWG
XT30 female 16AWG
XT30 male (single 16AWG for split pack support)
5 pin JST GH 1.25 for split pack
4 pin JST GH 1.25 for Can bus
3 pin JST GH 1.25 for LEDs
Confirmed to work with extended rails!
it plugs into our batteries exactly how it is but depending on what controller you are using you may need to swap out some connectors on one end. Feel free to reach out with any questions.
We tried to make these as a one shoe fits all. It supports discharge bypass BMS such as (Xlite, ZBMS, Maxkgo and others). here are all of the connections:
Battery side:
XT60 male 12AWG
XT30 male 16AWG
XT30 female (single 16AWG for split pack support)
5 pin JST GH 1.25 for split pack
4 pin JST GH 1.25 for Can bus
3 pin JST GH 1.25 for LEDs
Controller side:
XT60 female 12AWG
XT30 female 16AWG
XT30 male (single 16AWG for split pack support)
5 pin JST GH 1.25 for split pack
4 pin JST GH 1.25 for Can bus
3 pin JST GH 1.25 for LEDs
Confirmed to work with extended rails!
it plugs into our batteries exactly how it is but depending on what controller you are using you may need to swap out some connectors on one end. Feel free to reach out with any questions.