16s Vesc based controller kit
Tired of expensive controller replacements or want more oppurtunity for modifications. Look no further the options are pretty much limitless using this controller. You can change the motor, increase the battery voltage, add a dashboard display pretty much if you can think it you can do it.
This kit will include:
Vesc based controller
Bluetooth Module
16s wire harness compatibility kit
You will need to be able to solder a few wires but the kit is as plug and play as possible.
Here is a video of basic install and programming but there are many more features
https://youtu.be/idXo6FatcdE?si=bdeJwe6cH0qSAydT
Feel free to reach out with questions about further tuning or compatibility.
Firmware : compatible with vesc official firmware (Firmware Name in vesc tool: UBOX_SINGLE_100)
Voltage: 22S max （Firmware limit max voltage 96v）
Current: 100A max (The duration depends on the temperature around the product, heat dissipation and air circulation）
Ports available: PPM,UART(adc1/adc2),Canbus,Hall sensor,TypeC USB, NRF port, Ignite Key port, Power button port
Cables and connectors: 10cm length(out of the alum case) 12AWG phase wires with 4.0mm female bullet connector, 10cm(out length) 12AWG battery cable with XT90 male connector
Size: 58*75*22mm
Added 3.3v/5v/ignite key port fuse protection
Power button LED lights functional indication:
Normal--Solid green light
Abnormal--Blinking Red
Tired of expensive controller replacements or want more oppurtunity for modifications. Look no further the options are pretty much limitless using this controller. You can change the motor, increase the battery voltage, add a dashboard display pretty much if you can think it you can do it.
This kit will include:
Vesc based controller
Bluetooth Module
16s wire harness compatibility kit
You will need to be able to solder a few wires but the kit is as plug and play as possible.
Here is a video of basic install and programming but there are many more features
https://youtu.be/idXo6FatcdE?si=bdeJwe6cH0qSAydT
Feel free to reach out with questions about further tuning or compatibility.
Firmware : compatible with vesc official firmware (Firmware Name in vesc tool: UBOX_SINGLE_100)
Voltage: 22S max （Firmware limit max voltage 96v）
Current: 100A max (The duration depends on the temperature around the product, heat dissipation and air circulation）
Ports available: PPM,UART(adc1/adc2),Canbus,Hall sensor,TypeC USB, NRF port, Ignite Key port, Power button port
Cables and connectors: 10cm length(out of the alum case) 12AWG phase wires with 4.0mm female bullet connector, 10cm(out length) 12AWG battery cable with XT90 male connector
Size: 58*75*22mm
Added 3.3v/5v/ignite key port fuse protection
Power button LED lights functional indication:
Normal--Solid green light
Abnormal--Blinking Red
Tired of expensive controller replacements or want more oppurtunity for modifications. Look no further the options are pretty much limitless using this controller. You can change the motor, increase the battery voltage, add a dashboard display pretty much if you can think it you can do it.
This kit will include:
Vesc based controller
Bluetooth Module
16s wire harness compatibility kit
You will need to be able to solder a few wires but the kit is as plug and play as possible.
Here is a video of basic install and programming but there are many more features
https://youtu.be/idXo6FatcdE?si=bdeJwe6cH0qSAydT
Feel free to reach out with questions about further tuning or compatibility.
Firmware : compatible with vesc official firmware (Firmware Name in vesc tool: UBOX_SINGLE_100)
Voltage: 22S max （Firmware limit max voltage 96v）
Current: 100A max (The duration depends on the temperature around the product, heat dissipation and air circulation）
Ports available: PPM,UART(adc1/adc2),Canbus,Hall sensor,TypeC USB, NRF port, Ignite Key port, Power button port
Cables and connectors: 10cm length(out of the alum case) 12AWG phase wires with 4.0mm female bullet connector, 10cm(out length) 12AWG battery cable with XT90 male connector
Size: 58*75*22mm
Added 3.3v/5v/ignite key port fuse protection
Power button LED lights functional indication:
Normal--Solid green light
Abnormal--Blinking Red
